APC Back-UPS 1600VA, 230V, AVR, 4 X NZ Sockets
| Working Temperature: 0 - 40 °C |
| Net Weight: 10.3KG |
| Battery Type: Lead-acid battery |
| Topology: Line-interactive |
| Input Power Factor at Full Load: 0.56 |
| Transfer time: 6 ms typical : 10 ms maximum |
| Equipment protection policy: Lifetime : 50000 euros |
| Storage Relative Humidity: 0 - 95 % non-condensing |
| Control panel: LED Status display with on line : on battery |
| Max Configurable Power (Watts): 900 Watts / 1.6kVA |
| Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Sync to mains |
| Waveform type: Stepped approximation to a sinewave |
| Input Frequency: 50/60 Hz +/- 5 Hz Auto-sensing |
| Input voltage range for main operations: 140 - 300V |
| Number of Power Cords: 1 |
| Typical recharge time: 8hour(s) |
| Nominal Battery Voltage: 24 V |
| Replacement Battery: APCRBC176 |
| Expected Battery Life (years): 3 - 5 |
| Battery Volt-Amp-Hour Capacity: 168 |
| Surge energy rating: 273Joules |
| Maximum Height: 190MM |
| Maximum Width: 140MM |
| Maximum Depth: 390MM |
| Shipping weight: 11.3KG |
| Shipping Height: 297MM |
| Shipping Width: 495MM |
| Shipping Depth: 235MM |
| Operating Relative Humidity: 0 - 95 (Non-condensing) % |
| Operating Elevation: 0 - 3000meters |
| Storage Temperature: -15 - 40 °C |
| Storage Elevation: 0 - 3000meters |
| Audible noise at 1 meter from surface of unit: 40.0dBA |
| Protection Class: IP20 |
| Approvals: CB , CE, RCM |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.